Text only | Text with Images

J. Phil Thien's Projects

General Category => Thien Cyclone Separator Lid Discussion => Topic started by: kayak on November 06, 2022, 06:54:59 AM

Title: HF impeller outlet to filter ring transition
Post by: kayak on November 06, 2022, 06:54:59 AM
On the HF dust collector, the outlet of the impeller housing is about 6x4 inches, then gets choked down to a 5 inch round house. Not a huge choke, but a choke none the less. On an Australian woodwork forum I read about someone that replaced the round hose with a rigid adapter that matched the dimensions of the outlet on the impeller housing.

https://www.woodworkforums.com/f200/.../2#post1659193

Has anyone on here tried that, and if so, HOW, and what did you think of the end results?
Title: Re: HF impeller outlet to filter ring transition
Post by: phil (admin) on November 08, 2022, 07:42:06 AM
I got a "page not found" on that link?
Title: Re: HF impeller outlet to filter ring transition
Post by: kayak on November 13, 2022, 09:02:15 PM
https://www.woodworkforums.com/f200/generic-2hp-dc-171247/2#post1659193

Woodworkforums.com>Hand tools & machinery>Dust extraction>The generic 2HP DC>post number 21

See if that works
Text only | Text with Images