45 gallon steel drum,6"reectangular inlet/6" bell outlet,top hat seperater build

[alan m]

i used one cheap (out of a set) flush trim bit its still  going strong
i had it built before the discusions on two story seperaters started. everything is glued together so it would be a pain to add more in the middle
its not that heavy.
the grean thing in the pic is a filing cabinet, that is normally not there.
i wheel up a second drum . lift the seperater up and pull out the full can half way. all the weight is still on the full  can. then i slide in hte empty one and out the full one.
on the 200mm one im going to build im going to make the outside a circle too so that the weight will be kept to a minimum. i made the transition and its 10"x 6"
the two story seperater will be 20 " high. it could get heavy.